Page 2
STEP 4
- As illustrated in Figure 4, insert screws (not included) to secure mounting bracket to studs.
STEP 5
- Remove connectors from packaging box. As illustrated in Figure 5, connect wires to wiring
terminals. Refer to wiring section for terminal identification.
STEP 6
- Match wiring terminals to the labels on the back cover and re-insert the wiring terminals into
the unit. As illustrated in figure 6.
Figure 7
STEP 7
- As illustrated in Figure 7, secure faceplate to
mounting bracket with supplied screws. Route wires to
prevent pinching when installing unit into wall mounting
bracket.
Figure 4
Figure 6
Figure 5
IN-CR3
CXXANA-01 04
/20
Copyright © Greystone Energy Systems, Inc. All Rights Reserved Phone: +1 506 853 3057 Web: www.greystoneenergy.com