Greyp 6G-01, User Manual

Page: 19 / 65

BATTERY AND CHARGER
18
Important battery information
WARNING — Failure to follow the instructions in this section may result in damage to electrical
components on your bike and will void your warranty, but most importantly, may result in
serious personal injury or death. If your battery or charger exhibits any signs of damage, do not
use it and immediately bring it to your authorized Greyp Bikes retailer for inspection.
The connector used for the battery and charger is magnetised (RoPD) and can attract metal
objects. Do not allow any screws or other small, sharp and/or metallic objects to come in
contact with the battery connector, bike charging socket or charger connector.
Before you plug in the battery or charger, always check the battery connector, bike charging
socket and charger connector for any damage or foreign objects. In case of any damage do
not connect the battery or battery charger and please contact your authorized Greyp retailer .
In case of a foreign object please remove it before you connect the battery to your Greyp bike.
Keep the battery away from metal objects as they can cause a short-circuit.
Do not allow the battery to overheat. Protect the battery from excessive sun exposure. Do not
expose the battery to an open fire or radiator heat.
Do not immerse the battery in water. Do not directly spray the battery (or the connectors if the
battery is removed) with pressured water.
In the event of an inadequate connection between the charger connectors and the battery
connector or charging socket there could be functional problems and it is a potentially
hazardous situation. In this case you should disconnect the charger connector and the battery
and check what caused the inadequate connection.
Do not use a battery that shows any signs of damage (hollow casing, cracked lid, cracked
connector, damaged connector) or is leaking any fluids. Battery liquid can cause skin irritation
and burns. In the event of damage that results in skin or eye contact with any liquid from the
battery, immediately flush with water and seek medical assistance.
The battery is heavy. Be careful when handling it and do not drop it.
Do not connect the battery connector, bike charging socket or the charger connector if it is
wet. You can use a dry cloth to dry the battery connector, bike charging socket or charger
connector. It is important that you follow the instructions on the label of the battery charger
and always use an appropriate Greyp charger.
The battery can be charged whether it is installed in the bike or not. Refer to the appropriate
instructions regarding removing and installing the battery. Only charge the battery at an
ambient temperature between 0°C and 40°C (32°F and 104°F). If the outside temperatures
are too hot or too cold, charge the battery inside. For safety reasons, if the battery is too hot
or too cold, it will not charge.