H76.0.02.6C-04
Operating Manual GMH 3251
page 7 of 18
_____________________________________________________
_____________________________________________________________________________
4.3 Connections
Output:
Connection for optically isolated
interface adapter or for analog
output (please refer to chapter 9.2)
Sensor Connection
CH1:
channel 1
Sensor Connection
CH2:
channel 2
Power supply:
the mains adapter socket is located at the left side of the
device.
4.4 Pop-up Clip
Handling:
• Pull at label “open” in order to swing open the pop-up clip.
• Pull at label “open” again to swing open the pop-up clip further.
Pop-up clip closed
Pop-up clip at position 90°
Pop-up clip at position 180°
Function:
• The device with a closed pop-up clip can be plainly laid onto a table or attached to a belt, etc.
• The device with pop-up clip at position 90° can be set up on a table, etc.
• The device with pop-up clip at position 180° can be suspended from a screw or the magnetic
holder GMH 1300.
Device attached to a belt
Device set up on a table
Device suspended from
magnetic holder
GMH 1300
