E40.0.01.6C-04
Operating Manual EASY
LOG
80CL
Page 6 of 14
7.2 Operating possibilities at the device - logger operation
Function
Procedure
Display and adjust
cycle time
Push button
and
at the same time.
The main display shows “
CYCL”
. The secondary display
shows the currently adjusted cycle time [in sec.].
If the logger is currently not recording, the desired cycle time
[4 sec to 5h (18000 sec)] can be adjusted via the buttons
and
.
Press button
again to confirm your adjustments and to
leave the menu.
Note:
If no key is pressed for more than 2 min, the menu is
quit without saving.
Start recording
Push button
for about 5 seconds.
The main display shows “
run”
.
The secondary
display shows “
no”
.
To start recording select “
YES”
with the arrow keys
(button
or
) and verify with
.
Note:
If no key is pressed for more than 2 min, the menu is
quit without saving.
Stop recording
Push button
for about 5 seconds.
The main
display shows “
HoLd”
.
The secondary display shows “
no”
.
To stop recording select “
YES”
with the arrow key
(button
or
) and verify with
.
Note:
If no key is pressed for more than 2 min, the menu is
quit without saving.
Notice:
If you have activated one of the following options
• “logger stop via buttons disabled”
• “do not stop active logger”
at the configuration of the logger the menu to
stop the recording cannot be called.
SET
1
2
2
3
SET
1
SET
1
2
3
SET
1
SET
1
2
3
SET
1