4
Operation
© 2019 GREINER GmbH
Instruction manual - MULTILINE NEXT DC
45 / 72
G
REI
N
ER_
mul
til
ine
_ne
xt
_d
c_
ma
nu
al
_EN
_4
22
55
02
_re
v_
2.d
oc
x
4.15
Infusion rod holder and infusion rod
The couch can also be equipped with an infusion rod holder and an infusion rod.
Swivel the infusion rod holder
The infusion rod holder (1) or the infusion rod (2) can be simply swivelled from left to right or in the opposite di-
rection. The infusion rod holder sensitively snaps into the relevant end position.
CAUTION
Risk of trapping due to infusion rod.
Never leave the infusion rod holder in an intermediate position. When lowering the back, there is a
risk of trapping between the infusion rod and the back cover.
The infusion rod will definitely be damaged. The infusion rod holder may also be bent and will
have to be repaired.
Intermediate positions represent a danger and must therefore be avoided at all costs.
This also applies to couches that appear to be standing around unused. Patients and third parties
have no way of detecting unsafe intermediate positions of the infusion rod holder and of assessing
the resulting danger.
Inserting and adjusting the infusion rod
After inserting the infusion rod, tighten the handwheel (3) on the infusion rod holder. Make sure that the infusion
rod has also been pushed into the infusion rod holder as far as it will go. The height of the infusion rod can be
continuously adjusted. To do this, loosen the clamping screw (4) on the infusion rod. Hold the upper pull-out part
of the infusion rod while doing this. Adjust the height as desired or required. Retighten the clamping screw.
NOTE
Do not use the infusion rod as a push handle - risk of damage (see 4.11 Driving).
1.
Infusion rod holder
2.
Infusion rod
3.
Handwheel
4.
Clamping screw
Fig. 60 Infusion rod holder and infusion rod
1
2
4
3
