Operating Manual Chrono Touch
Page 18
Ver. 02/ 13
Testing pendulum clocks with an unknown beat number is carried out in the
"Diagram selection“ program:
MEASUREMENT
Touch the "Variable beat number" button.
The following display appears on the screen:
Once the values are determined, the rate of the pendulum clock appears on the
screen:
Displayed on counter “T” is the test time elapsed.
In the “N-CNT" area: the currently measured beat number in beats/h is displayed.
In the "N-ITG" area: the integrated beat number/h determined over the entire test
time is displayed.
