Operating Manual Chrono Touch
Page 13
Ver. 02/ 13
Once the values are determined, a diagram showing how the measured watch
is running appears on the screen:
In the case of a mechanical watch the following values are displayed:
beat number, lift angle, measurement time, rate variations, amplitude and beat
error.
If you touch the screen, the following appears:
MEASUREMENT
By touching the "Print" button, the following screen appears:
The watch data can be programmed into the "Name" and "Serial number" boxes. To
do this the two boxes are touched one after the other and the data entered. Confirm
and print out with “OK”.
You can use the "Delete all" button to delete all the data again.
