background image

GREER COMPANY

GREER COMPANY

GREER COMPANY

GREER COMPANY    
    

Crane Systems

Crane Systems

Crane Systems

Crane Systems    

GREER COMPANY 1918 East Glenwood Place, Santa Ana, CA  92705     Tel: 714) 259-9702    Fax: 714) 259-7626 PN W414107- 
MicroGuard

 414 System Lattice Boom Cranes Horizontal Display Clyde M4190 Barge Mount OPERATOR'S MANUAL    12/20/01 

4 of 21 

SYSTEM DESCRIPTION

SYSTEM DESCRIPTION

SYSTEM DESCRIPTION

SYSTEM DESCRIPTION    

The MicroGuard

®

 414 Rated Capacity Indicator (RCI) System for lattice boom cranes is intended to aid 

the crane operator in efficient crane operation by continuously monitoring the load and warning the 
operator of an approaching overload or Two-Block condition. Monitoring crane functions is accomplished 
with the use of highly accurate sensors that continuously compare the load suspended below the boom 
head with a copy of the crane capacity chart stored in the computer memory. When an approaching 
overload or Two-Block condition is sensed by the system, audible and visual alarms activate. This 
System can also be configured to cause cessation of boom movement – winch up, boom down, and 
extend out (function kick-out). 

The MicroGuard

®

 414 Rated Capacity Indicator (RCI) System for lattice boom cranes is used with the 

MicroGuard

®

 Rated Capacity Indicator (RCI) 414 Display. 

The MicroGuard

®

 414 System provides the operator with a continuous display of: 

 Rated 

Capacity 

 Actual 

Load 

  Percentage of Rated Capacity 

  Radius of the Load 

  Angle of the Main Boom 

  Working Area (if applicable) 

 Crane 

Configuration 

Use of alternate display push buttons provide the operator with: 

  Length of the Main Boom. 

  Height of the Boom Head. 

 

On-screen messages relate to various 
alarms that may occur during normal 
operation of the system. These 
messages are displayed in the left and 
upper right displays. The lower right 
display provides information about the 
currently selected crane configuration. 

Summary of Contents for Microguard 414






















Reviews: