GreenWorks 41572, Owner'S Manual

Page: 12 / 22

12
BATTERY
IMPORTANT!
The battery pack is not charged when it is purchased. Before using the air
compressor for the first time, place the battery pack in the battery charger and charge. Make
sure to read all safety precautions, and follow the instructions in the Battery Charger section.
To install (See Figure 2.)
1. Align the tongue (3) of the battery pack with the cavity (4) in the air compressor housing.
2. Grasp the air compressor (2) firmly.
3. Push the battery pack into the handle until the latch locks into place.
4. Do not use force when inserting the battery pack. It should slide into position and “click”.
To remove (See Figure 2.)
1. Press the latch button (1) on the battery pack down and hold.
2. Grasp the air compressor (2) firmly, and pull the battery pack out of the housing .
OPERATION
W A R N I N G
Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire:
• Replace the battery pack or the charger immediately if the battery case or charger cord is damaged.
• Verify that the switch is in the OFF position before inserting or removing the battery pack.
• Verify that the battery pack is removed and the switch is in the OFF position before inspecting, adjusting,
or performing maintenance on any part of the blower.
• Read, understand, and follow the instructions contained in the section entitled Charging Procedure.
NOTE: The battery pack fits into the handle snugly in order to prevent accidental dislodging. It may
require a strong pull to remove it.
Fig. 4
4
1
2
3