6
GENERAL SAFETY RULES
W A R N I N G
Kickback may occur when the moving chain contacts an object at the upper portion of the tip of the
guide bar, or when the wood closes in and pinches the saw chain in the cut. Contact at the upper
portion of the tip of the guide bar can cause the chain to dig into the object and stop the chain for
an instant. The result is a lightning fast reverse reaction that kicks the guide bar up and back toward
the operator. If the saw chain is pinched along the top of the guide bar, the guide bar can be driven
rapidly back toward the operator. Either of these reactions can cause loss of saw control, which
can result in serious injury. Do not rely exclusively on the safety devices built into the saw. As a
chainsaw user, you should take several steps to keep your cutting jobs free from accident or injury.
THE FOLLOWING PRECAUTIONS SHOULD BE FOLLOWED TO MINIMIZE
KICKBACK:
1.
Always grip the saw firmly with both hands. Hold the saw firmly with both hands when the
unit is running. Place your right hand on the rear handle and your left hand on the front
handle, with your thumbs and fingers encircling the chain saw handles. A firm grip and a
stiff left arm will help you maintain control of the saw if kickback occurs.
2. Make sure that the area in which you are cutting is free of obstructions. Do not let the
nose of the guide bar contact a log, branch, fence, or any other obstruction that could be
hit while you are operating the saw.
3. Always cut with the unit running. Fully squeeze the trigger switch and maintain cutting
speed.
4.
Use only the replacement guide bars and low-kickback chains specified by the
manufacturer for the saw.
•
With a basic understanding of kickback, you can reduce or eliminate the element of surprise.
Sudden surprise contributes to accidents.
•
Keep proper footing and balance at all times.
•
Do not cut above shoulder height or overreach when cutting.
•
Follow the sharpening and maintenance instructions for the saw chain.
Fig. 1
Fig. 2
Summary of Contents for 00-0000-0
Page 38: ...38 EXPLODED VIEW...
Page 41: ...41 NOTES...
Page 42: ...TOLL FREE HELPLINE 1 888 90WORKS 888 909 6757...
