•
Inspect the blade and replace it or sharpen it, if required
(refer to the Maintenance section).
•
Do not store the machine next to corrosive materials, such
as fertilizer or rock salt.
•
Keep the machine out of the reach of children.
•
Do not cover the machine with a solid plastic sheet.
Plastic coverings trap moisture around the machine,
which causes rust and corrosion.
•
Check thoroughly for any worn or damaged parts that
need replacing and order them from your dealer.
•
Thoroughly lubricate machine, according to lubrication
instructions.
•
Fully charge and service the batteries.
•
Do not deflate tires.
•
The machine should be stored in a well-ventilated, clean
and dry place.
15.3 PREPARE FOR USE AFTER
STOAGE
The following steps should be taken before using the mower
after it has been stored:
•
Fully charge the batteries.
•
Check tire pressure and inflate as needed.
•
Briefly drive the mower and check all systems and
components to ensure they are functioning correctly.
16
TROUBLESHOOTING
Problem
Cause
Solution
The machine
does not move.
1. There is no battery pack in the battery compart-
ment that controls the drive function or the bat-
tery packs are not Globe designed.
2. The battery pack is out of power.
3. The steer control lever is in the NUETRAL posi-
tion.
4. There is no person sitting on the seat or the seat
switch is not connected.
5. The steer control leverts are not powered on.
6. The PTO switch, or the the left and right steer
control levers are not in the original position
when the machine power is on.
7. The battery pack that controls the drive function
is in sleep state.
1. Make sure at least one Greenwoks designed bat-
tery pack is inserted in the battery compartment
that controls the drive function. Make sure the
battery pack has power.
2. Make sure at least one green light on the battery
pack is on.
3. Make sure the steer control levers are both in the
Neutral position.
4. Make sure the operator is sitting on the seat, if
not, the beeper will alarm.
5. Make sure the steer control levers work.
6. Return the steer control lever and PTO switch to
the original position, restart the machine. if the
machine still fails to work, contact the service
center for help.
7. Restart the machine.
Sudden break-
down during
driving.
1. The battery is out of power.
2. The seat switch is disconnected on rugged or
bumpy roads.
3. The accelerator fails.
4. The vehicle controller fails.
1. Make sure at least one Greenwoks designed bat-
tery pack is inserted in the battery compartment
that controls the drive function.Make sure the
battery pack has power.
2. Ruturn the steer control lever to original position,
restart the machine, operate the steer control lev-
er to check if the machine works normally. 3
、
Contact a technical people for help.
23
English
EN
P0803155-00 v1.3
