GreenWorks Pro 7406102 Page 18 Operator'S Manual Download

Page: 18 / 30

Dis-
play

Description

Fault code on
LCD

Beep-
er

Cause

Solution

The left or
right cutter
does not work.

No battery pack is inserted in
the PMU2 of the battery com-
partment.

V 12

There is no battery pack
in the battery compart-
ment.

Contact a
specified serv-
ice center.

The 30pin connector between
the vehicle wirie harness and the
left cutter controller is loose.

The connector is loose.

No battery pack is inserted in
the PMU3 of the battery com-
partment.

V 13

There is no battery pack
in the battery compart-
ment.

Contact a
specified serv-
ice center.

The 30pin connector between
the vehicle harness and the right
cutter controller is loose.

The connector is loose.

The 10pin connector between
the vehicle wire harness and the
battery compartment is loose.

V 22

The connector is loose. Contact a

specified serv-
ice center.

The 10pin connector between
the vehicle wire harness and the
battery compartment is loose.

V 23

The connector is loose. Contact a

specified serv-
ice center.

A high-voltage battery pack is
inserted in the PMU2 of the bat-
tery compartment.

ML11

Wrong battery pack ap-
plied.

Check the bat-
tery pack.

A high-voltage battery pack is
inserted in the PMU3 of the bat-
tery compartment.

MR11

Wrong battery pack ap-
plied.

Check the bat-
tery pack.

The left cutter motor fails.

ML13

The motor fails.

Contact a
specified serv-
ice center.

The right cutter motor fails.

MR13

The motor fails.

Contact a
specified serv-
ice center.

The left mowing motor is over-
loaded.

ML14

The motor shut down
for protection.

Raise the deck
height and re-
duce drive
speed.

The machine is blocked with
grass and debris.

Clean the deck.

The blade hit a hard object.

Restart the ma-
chine.

The left mowing motor is over-
loaded.

MR14

The motor shut down
for protection.

Raise the deck
height and re-
duce drive
speed.

The machine is blocked with
grass and debris.

Clean the deck.

The blade hit a hard object.

Restart the ma-
chine.

English

P0803155-00 v1.3

Summary of Contents for 7406102































Search results

Summary of Contents for 7406102

Reviews:

Related manuals for 7406102

Brands by name

Popular brands

GreenWorks Pro 7406102, Operator'S Manual

Search results

Summary of Contents for 7406102

Reviews:

Related manuals for 7406102

Brands by name

Popular brands