9
TRANSPORTATION AND
STORAGE
9.1
MOVE THE MACHINE
• Move forward by the handle (1), or lift up the charger
by two handle grips (11).
9.2
STORE THE MACHINE
WARNING
Remove the battery pack before you store the charger or
disconnect the charger.
You can store the wheel charger horizontallly or vertically.
10
TROUBLESHOOTING
PROBLEM
POSSIBLE
CAUSE
SOLUTION
Charger doesn't
work. Charger
shows defective
mode. (LED
flashes Red)
Battery pack or
charger is defective
or there is a bad
connection be-
tween the battery
pack and charger.
Try to remove and
reinsert the battery
pack in the charg-
er.
Try charging a dif-
ferent battery
pack.
Unplug the charg-
er and wait until
the red LED goes
out, then reconnect
the plug to the
power supply.
Charger doesn't
work. Charger
shows evaluation
mode (LED indi-
cates Red solid
ON).
Battery pack is ei-
ther too hot, or too
cold.
Allow the battery
pack to reach nor-
mal temperature.
Charging will be-
gin when the bat-
tery pack returns
to 3°C-47°C
(37°F-117°F).
11
TECHNICAL DATA
Model
82CH62K
Voltage
82 V
Input
120V AC 50/60Hz, 15A Max
Output
82V DC 6A
5
English
EN
Summary of Contents for 82CH62K
Page 1: ......
