IMPORTANT: Collect the water in a container, not the drip tray.
5. Replace the water bottle (see Installing the Water Bottle).
To prevent mineral deposits that can affect the taste and flow of the water and
to ensure proper product performance, your water dispenser must cleaned
every 4 months.
1. Unplug the power cord.
2. Remove the water bottle and bottle support collar.
3. Drain the reservoirs (see Draining the Reservoirs).
4. Pour a Greenway
®
water dispenser cleaner or a mixture 4 cups / 1L of
vinegar with 4 cups / 1 L of hot water into the reservoir and wait 20
minutes. If using a water dispenser cleaning solution, please follow the
manufacturer's instructions.
IMPORTANT: To avoid water overflow while cleaning the dispenser, always remove the bottle support collar before
pouring water or cleaning solution into the reservoir (see Figure A).
5. Press both dispensing taps until water no longer comes out.
6. Drain the reservoirs.
IMPORTANT: Collect the water into a container, not the drip tray.
7. Rinse with clean water.
8. Replace the bottle support collar and the water bottle (see Installing the Water Bottle).
IMPORTANT: Drain approximately 4 glasses of water from each tap before initial use. This does not need to be done
with replacement bottles.
When not using the dispenser for long periods of time or when going on vacation, conserve energy, unplug the dispenser
and drain the reservoirs
(see Draining the Reservoirs). Follow Initial Product Cleaning Procedures upon return and
startup of the dispenser.
SPECIFICATIONS
5
Cleaning Kit
Available online at
www.greenwayhp.com
6
Cleaning the Inside of the Dispenser
Going Away on Vacation
GWD5500WBC
Cooling Temp (approx.):
5˚C - 8˚C / 41˚F - 46˚F
Cold
Output per hr:
0.5 gal / 2.0 L
Internal Tank:
0.9 gal / 3.4 L
Power Consumption:
85-103 W
