Multi Carrier HXF 3302
21
Pins and Bushes
All main pivot points are furnished with replaceable bushes. If there are any signs of wear, these
must be replaced.
All bushes are available from Greentec’s Parts Department.
Storage
Remember regular maintenance will greatly increase the life of the machine
Before storing away, thoroughly wash the machine removing all traces of grass and dirt. Great
care must be taken when washing with high-pressure hoses, do not hold the water jet close to
the paintwork. Use steam cleaners with caution; be sure to remove all detergents to avoid any
discolouring or damage to paint. Grease all grease points until fresh grease shows. It is important
where possible to store under cover to protect against rain and sunlight. Always ensure a firm
level surface. Control levers must be wrapped in plastic sheeting and taped over to keep dry
Smear greaser on all areas vulnerable to corrosion, in particular the chrome on the
ramrods.
Before you attempt to do any repairs, service, maintenance or adjustment on your
machine, ensure the engine has stopped and the key removed. P.T.O. is disengaged,
handbrake secure, and the head is firmly on the ground.
Remember regular maintenance will greatly increase the life of the
machine
WARNING
Do not use grease containing Molybdenum disulphide on nylon
bushes and wear pads.
