Multi Carrier HXF 3302
15
EXTRA EQUIPMENT
Hydraulic angle adjustment
Hydraulic cutting angle adjustment
This equipment allows you to adjust the cutting angle from the cabin.
Work the machine by using the black switch (2) on the control panel.
Once the correct angle is set, you can begin to work.
Correction is also possible while working. Use small movements. Large
corrections is best done while stationary.
Control panel
Counterweight
Counterweight can be bought separately. Set of 9 units, 11.6 kg each. 105 kg total.
1. Switch on/off
2. Cutting angle
3. Tool on/off
4. Fuse in the plug (8 amp)
2
.
A
r
e
i
t
s
g
e
r
ä
t
d
r
e
h
e
n
3
.
A
r
b
e
i
t
s
1. Flow-adjustment
2. Manual over steering
3. Mini-mesh
4. Pressure relief valve (200 bar)
A. Flow for tool (regulated)
B. Not in use
C. Cutting angle
D. Cutting angle
P. Pressure, flow from pump
T. Tank Connection, pressure less
+ T from motor
