Page
7
af
20
Belt diagram
It is utmost importance that the belts are correctly mounted and tightened. When new belts are
mounted they must be tensioned to 700 Nm, for the short and 900 Nm for the long belts.
After 3-5 working hours the belts may have slackened and must be checked.
BEWARE!!
The tension has now changed. The short belts is tightened to 550 Nm, the long belts are
tightened to 650 Nm.
Contact GreenTec´s After Sales Department if you have any questions. We might help you with a
piece of good advice.
LRS 1601
Tool for belt tension control
“Optikrik II” Part no. 200155.0
700/550 Nm
900/650 Nm
900/650 Nm
