background image

Page 

10

 af 

20

 

 

Safety 

 

 

Never operate the machine with other people present, as it is possible for debris to be thrown 
from the saw blades in all directions. 
 

 

Always ensure all cab safety guards are in place and all tractor windows are closed. Newer al-
low an inexperienced person to operate the machine without supervision. 
 

 

Never allow children to play o nor around the machine at any time. 

 

 

Never attempt any maintenance or adjustment without first disengaging the pto / hydraulic 
pump, lowering the head to the ground, stopping the tractor engine and applying the tractor 
parking brake. 
 

 

Before leaving the tractor cab always ensure that the saw head is firmly on the ground, no 
weight is on the tractors hydraulics and blades have stopped spinning. 
 

 

 Never stop the engine, when the power transmission is engaged. 

 

 

Always check that all guards are properly fitted, check there are no damaged or loose parts. 
 

 

Always drive with the correct rotations of the blades (see specifications). 

 

 

Maximum oil pressure of 250 bar in the hydraulic hoses. 

 

 

Never transport without the blade protection guards mounted. 
 

 

Always inspect work area for wire, steel posts, large stones and other dangerous materials. If 
such items are found remove them. 
 

 

Never drive with wire or the like. wrapped around the blades / knife axles. Stop 
immediately and remove the unwanted material. 

 

 

Never attempt to use the machine for any purpose other than that it was designed for. 

 

 

Ensure that all warning labels are always visible and that they are not damaged, defaced or 
missing. 
 

 

PTO must never be connected during transport. 

 
 

 

Summary of Contents for LRS 1601





















Reviews: