GP1365
GP1364
GP1342
GP1001
GP1294
GP1150
GP1381
GP1128
GP1128
GP1004
GP1128
GP1364
GP1192
GP1004
GP1006
GP1127
GP1206
GP1205
GP1203
REAR AXLE ASSEMBLY RIGHT
10
1, 2, 3... Follow the notes in
numbered order. Roll pins
should be inserted until
equal lengths show each
side of the axle.
1. Fit the disc hub, GP1381,
over the axle and secure in
place with a roll pin through
the hole nearest the centre
of the axle.
2. Fit the brake disc, noting the
correct rotation arrow, to the
hub using 6 x GP1006 with
a little thread lock (see Keep
it Tight note on “REAR AXLE
ASSEMBLY - LEFT” page.
3. Slide the centre part of
the bearing, GP1128, onto
the axle. Do not tighten the
grub screws until the axle is
aligned on the car - but don’t
forget to do so.
4. Insert the final roll pin
once the hub, disc and
bearing have been fitted.
Remember to support the
axle and take great care
when hammering this in.
