background image

keep it for future reference. Repairs or replacements without prior authorization, or at an 

unauthorized repair facility, will not be covered by this warranty

 

4, Return Policy and Procedure

 

  Defective Return 

If the defective unit can not be repaired by the authorized repair center and the unit was within 

one (1) year, GPA will make a decision, on GPA sole options, either replace it with an 

equivalent or return it to GPA and consumer will get refund. The refund amount will be 

determined by the used time as below: 

- Within thirty (30) days from the original purchasing date, full amount will be refunded. 

- For Two(2)-Year Warranty items household use only,  from thirty-one (31 days) but within one 

(1) year from the original purchasing date, the refund proportion will be determined by 100% 

minuses its actual using months divided by twelve (12).  

Formula: Refund Proportion = 100%-number of used month/12*100%  

 

  Remorse Return 

If consumer wants to return due to consumer’s mind changing or any other non-quality reason, 

which is called 

Remorse Return

, and the unit is in its original packing condition or consumer 

opened the original package but never fill the fuel and/or oil into the unit, and the unit could be 

repacked properly, within thirty (30) days from the original purchasing date, GPA will provide a 

Return Goods Authorization number (RGA #) to the retailer to accept the return for refund.  

Consumer will pay the return freight and 15% of the retail price (excluding tax) for re-stock fee. 

The consumer should contact the retailer with GPA’s RGA# and will get remaining amount 

refunded after the return is received by GPA. The return address will be noted by GPA when the 

RGA# is provided

.

 

Attention please:  

Do Not Return The Unit To The Place Of Purchase even 

unless the retailer / distributor has a 

certain agreement with GPA in written

.  

All refund will be issued in terms of Credit Memo (CM) to the retailer/distributor, and the 

consumer will get refund from the original store.  

 

5, Warranty Exclusions 

This warranty does not cover the following repairs and equipment: 

  Normal Wear and Tear 

Products with mechanical and electrical components need periodic parts and service to perform 

well, including but not limited,

 

lter elements, o-rings, spark plug, rubber mounts, etc.  This 

warranty does not cover repair when normal use has exhausted the life of a part or the 

equipment as a whole. 

  Installation, Use and Maintenance 

--This warranty will not apply to parts and/or any labor of installation. 

--This warranty will not apply to parts and/or any labor if the product is deemed to have been 

misused, neglected, involved in an accident, abused, loaded beyond the product's limits, 

modi

fie

d, installed improperly or connected incorrectly to any electrical component. 

--Normal maintenance is not covered by this warranty and is not required to be performed at a 

facility or by a person authorized by GPA. 

* Except as otherwise stipulated in any of the following enclosed Emission Control System 

Warranties (if applicable) for the Emission Control System: U.S. Environment Protection Agency 

(EPA), California Air Resources Board (CARB) and/or Environment Canada (EC). 

  Other Exclusions 

This warranty excludes: 

–Cosmetic defects such as paint, decals, etc. 

5000W Generator

Green-Power America (GPA)

 

Version 2018-1 1

st

 Revise

 

 

 

4

Summary of Contents for GPD5000CW





















































Reviews: