PDMM-10
5
Important Safety Information
Do not change the measurement function or range while the
test leads are connected to a component or circuit.
Failure to observe this precaution can result in injury and can
damage the unit.
The fuse is an integral part of the overvoltage protection.
When fuse replacement is necessary, see Specifications for the
correct type, size, and capacity. Using any other type of fuse
will void the overvoltage protection rating of the unit.
Failure to observe this warning can result in severe injury or
death.
• Do not operate with the case open.
• Before opening the case, remove the test leads from the
circuit and shut off the unit.
Failure to observe these warnings can result in severe injury or
death.
Summary of Contents for PDMM-10
