4
Important Safety Information
Electric shock hazard:
Contact with live circuits can result in
severe injury or death.
Electric shock and fire hazard:
• Do not expose this unit to rain or moisture.
• Do not use the unit if it is wet or damaged.
• Inspect the test leads before use. They must be clean and
dry, and the insulation must be in good condition.
• Use this unit for the manufacturer’s intended purpose only,
as described in this manual. Any other use can impair the
protection provided by the unit.
Failure to observe these warnings can result in severe injury or
death.
Electric shock hazard:
• Do not apply more than the rated voltage between any two
input terminals, or between any input terminal and earth
ground.
• Do not contact the test lead tips or any uninsulated portion
of the accessory.
Failure to observe these warnings can result in severe injury or
death.
Summary of Contents for PDMM-10
