GTS-1930 Cable Stripper
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Description
The Greenlee GTS-1930 Cable Stripper is intended
to remove encapsulated XLP and EPR insulations of
600 volt secondary cable. Bushings are available for
cables with concentric, compressed, or compacted
conductors.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
GTS-1930 Cable Stripper
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information ........................................ 3
Identification .................................................................. 4
Specifications ................................................................ 4
End Stripping Instructions ............................................. 4
Preparation ................................................................ 4
Procedure .................................................................. 4
Bushing Selection ...................................................... 4
