background image

Hydraulic Punch Driver

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

3

IMPORTANT SAFETY INFORMATION

SAFETY 

ALERT 

SYMBOL

This symbol is used to call your attention to hazards 

or unsafe practices which could result in an injury or 

property damage. The signal word, defined below, 

indicates the severity of the hazard. The message 

after the signal word provides information for pre-

venting or avoiding the hazard.

Immediate hazards which, if not avoided, WILL result 

in severe injury or death.

Hazards which, if not avoided, COULD result in 

severe injury or death.

Hazards or unsafe practices which, if not avoided, 

MAY result in injury or property damage.

Read and understand all of the 

instructions and safety information 

in this manual before operating or 

 servicing this tool.
Failure to observe this warning could 

result in severe injury or death.

Electric shock hazard:
Do not use this tool near live circuits. 

This includes, but is not limited to, the 

following:
•  near circuit breaker panels or fuse 

boxes with energized circuits

•  near junction boxes with energized 

circuits

Failure to observe this warning could 

result in severe injury or death.

Skin injection hazard:
•  Hand-tighten all couplers com-

pletely before operating the pump. 

Do not use tools to tighten the 

couplers.

•  Do not use hands to check for 

leaks.

•  Do not hold hose or couplers while 

the hydraulic system is pressurized. 

•  Release the hydraulic pressure 

before disconnecting the hoses or 

couplers, and before servicing the 

pump or accessory.

Oil under pressure easily punctures 

skin causing serious injury, gan-

grene or death. If you are injured by 

escaping oil, seek medical attention 

immediately.

Wear eye protection when operating 

or servicing this tool. 
Failure to wear eye protection could 

result in serious eye injury from flying 

debris or hydraulic oil. 

Summary of Contents for 38456











Reviews: