GreenHalse Electronics RComLow, Installation Manual & User Manual

Page: 7 / 12

RCom Installation Guide & User Instructions
Configuration
Default settings
The RCom is supplied ready to use. However, there are several settings
that can be adjusted if required.
The RCom is designed to be very simple to use in normal operation. The
configuration system uses the existing controls, and these notes should be
read carefully in order to understand the set-up procedure.
The default settings can be restored by powering up the device with both
buttons held in for several seconds.
Adjustable settings
There are four settings that can be adjusted by the user.
1. Com Pan: When stereo headphones are used, the position of the com
signal in the stereo field can be adjusted. The reason for this is that when
monitoring an auxiliary signal on the headphones, the com signal can be
panned to one side to help the user distinguish between the signals. This
does not affect the sound heard by other users.
2. Mic Null: It is possible to reduce the level of the users own
microphone in his/her headphones. This is done using a cancelling
technique, and near the top end of the control the microphone level can be
reduced to virtually zero. This does not affect the microphone level on the
rest of the circuit as heard by other users.
3. Mic Gain: This level can be adjusted to suit various microphone
types. The default value is suitable for most dynamic microphones. This
setting DOES affect other users on the system, and care must be taken to
Page 7