Greencut LJ400C, Instruction Manual

Page: 53 / 80

53
EN
TECHNICAL DATA
BELT SANDER
Nominal input voltage 240V ~ 50 Hz
Power 400W
Disc diameter 150mm
Belt Size 914x100mm
Table size 226x160mm
Belt inclination 0-90º
Tilting disc table 0º-45º
Belt speed 7,35m/s
Speed 2980rpm
Sound power level Without load: 88.7dB / With load: 89.4dB
Weight 16Kg
NOTE: GREENCUT reserves the right to modify the technical data without prior notice.
BOX CONTENTS
1. Belt sander (1 pc.)
2. Hexagonal key S=6 (1 pc.)
3. Hexagonal screw M8*16 and flat washer D8 (2 pcs.)
4. Support for sanding belt (1 pc.)
5. Miter gauge assembly (1 set)
6. Disc working table (1 pc.)
7. Locking handle (1 pc.)
8. Large flat washer (1 pc.)
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.