![background image](http://html1.mh-extra.com/html/greencut/gwp300x/gwp300x_instruction-manual_2261579049.webp)
49
EN
TECHNICAL DATA
GWP200X
Engine
OHV 4 stroke engines
Cylinder capacity
208cc
Power
7cv / 3.600rpm
Fuel capacity
4.6L
Type of fuel
Unleaded 95
Oil Capacity
0.6L
Oil type
10W30, 10W40, 15W30 y 15W40
Starter system
Recoil Start
Input/output size
3” (50mm)
Maximum pumping height
28m
Maximum flow rate
60.000L/h
Maximum suction depth
7m
Weight
28kg
NOTE:
GREENCUT reserves the right to modify the technical characteristics without prior notice.
PRODUCT USE
PREPARATION
CONNECTING THE WATER INLET PIPE
Use a suitable hose, gasket and clamp. The water inlet hose should be continuous and not bent. The length of the
tube should not be longer than as required. As if it is near the surface of the water supply, the water pump will
perform at its best efficiency point.
ATTENTION:
Before pumping, install the filter firmly on the end part of the water inlet pipe. Any
impurities will be filtered, hence avoiding blockages which damage the impellers.
ATTENTION:
Make sure to install the gasket and pipe clamp correctly to avoid water leakage and
loss of pump performance. A loose water inlet tube will reduce the performance of the water pump
and the capacity of self suction.
Suction port
Filter