Greencut GS9200, User Manual

Page: 3 / 18

Product Manual - Chainsaws
10814082100
2
2
General Safety
It is important you read and
understand the instruction
manual before first use and keep
the manual in a safe place for
future reference.
Safety precautions must be
observed to reduce the risk of
personal injury when operating
this machine.
DANGER! Keep clear of power
lines, contact can cause death.
It is strongly recommended that
a comprehensive training course
on machine use, fuel handling
safety and engine operation be
completed before attempting to
use this machine.
Like all power equipment this unit must
be handled carefully
.
Look for power wires before starting
work.
Ensure you /your saw/branches you are
cutting don’t go near power wires.
Do not expose yourself or others to danger. Do
not permit others to use this machine unless
they have read this manual and are trained in
its operation. Do not operate if the equipment is
damaged or in an excessively worn state. To
reduce fire hazards keep the engine and
silencer free of debris, leaves or excessive
lubricant. Do not use any attachments or
accessories with the equipment other than the
ones recommended by the supplier. Serious
injury to the operator or bystanders can result
as well as cause damage to the machine.
Always use proper handles and / or shoulder
strap when using the equipment. Do not use the
unit if it is damaged or poorly adjusted. Never
remove the machine’s guards. Serious injury to
the operator or bystanders could result as well
as damage to the machine. Never leave the
machine running and unattended. Do not use
this unit for any job other than those for which it
is intended as described in this manual. During
or after operation of the engine, never touch hot
parts such as the muffler, the high voltage wire
or the spark plug. Do not operate the machine
in the rain or under wet conditions. Always
ensure all handles and guards are fitted when
using the machine. Always keep the machine
away from naked flame or sparks. Always stop
the engine before cleaning / clearing a blockage
or checking, maintenance or working on the
machine.
Working at heights
Always use a scissor lift, never work on a ladder
or in a tree, never work on an insecure support
and never operate your unit with one hand.
Always be sure of a safe and secure operating
position especially when working at heights.
Clothing and Equipment
Dress properly. Do not wear loose clothing or
jewellery which can be caught in moving parts.
Use of sturdy gloves, non-skid footwear, and
safety glasses is recommended;
Always wear ear protection. Loud
noises for an extended period of
time may damage your hearing.
Total face and head protection must
be worn to reduce injury from falling
branches.
Wear no-slip heavy duty work
gloves to improve your grip on the
brush cutter handle. Gloves also
reduce the transmission of machine
vibration to your hands.
The dust, vapour and smoke
produced during operation may be
dangerous to health. If the work
area is very dusty or smoky, wear a
respirator.
Transporting the Machine
The engine should be turned off when the
machine is moved between areas and when
transporting or storing the machine. Always turn
off the engine. Always fit the blade covers
before carrying your tool. When transporting in
a vehicle: properly secure your machine to
prevent turnover, fuel spillage and damage.
Fuelling
Fuel is extremely flammable.
Keep clear of naked flames. Do
not spill any fuel. Do not smoke
near fuel or the machine. Always
shut off the engine before refuelling. Do not fuel
a hot engine
–
fuel may spill and cause a fire.
Open the fuel cap carefully to allow any
pressure build-up in the tank to release slowly
and avoid fuel spillage. Fuel your machine only
in well ventilated areas. If you spill fuel, wipe
the machine immediately
–
if fuel gets on your
clothing, change immediately. To reduce the
risk of serious or fatal burn injuries, check for
fuel leakage. If fuel leakage is found, do not
start or run the engine until leak is fixed.
During Operation
Make sure you always have good balance and
secure footing. Always be aware of your
surroundings and stay alert for possible
hazards that you may not hear due to the noise
of the machine.
Never allow children to access the
machine.
Avoid operating while people, especially
children are nearby. To reduce the risk of injury,
do not allow any other persons within a radius
of 25 meters of your own position. To reduce
the risk of damage to property, also maintain
this distance from other objects (vehicles,
windows).
After Finishing Work
Always clean dust and dirt off the machine
–
do
not use any grease solvents. Always keep the
machine clean, especially, the fuel tank, its
surroundings, and the air cleaner. After the
engine has stopped, the muffler will still be hot.
Never place the machine in any places where
there are flammable materials such as dry
grass, combustible gases or combustible liquids
etc. Replace cutting tool covers.
Maintenance and Repairs
Service the machine regularly. Do not attempt
any maintenance or repair work not described
in the instruction manual. Have all other work
performed by a servicing dealer. We
recommend that you have servicing and repair
work carried out exclusively by an authorised
service person. Before proceeding to adjust or
repair the machine, be sure to stop the engine
and detach the spark plug lead. Never attempt
to make engine adjustments while the unit is
running to the operator. Always make engine
adjustments with the unit resting on a flat, clear
surface.