Greencut GS9200, User Manual

Page: 16 / 18

Product Manual - Chainsaws
10814082100
15
15
Transporting & Storage
CAUTION! Fuel stored in the carburettor for extended periods can cause hard starting, and could also lead to
increased service and maintenance costs.
IMPORTANT! Use only clean, fresh non-ethanol 95+ unleaded with 2-Stroke oil mix.
IMPORTANT! If the machine will not be used for 30 days or longer, use the following procedures to prepare it for
storage.
IMPORTANT! Before storing the machine, repair or replace any worn or damage parts. Make sure the protective
covers are in place.
1. Clean external parts thoroughly and apply a light coating of oil to all metal surfaces.
2. Remove the spark plug and poor about 3ml of oil into the cylinder through the spark plug hole. Slowly pull the
recoil starter 2 or 3 times so oil evenly coat the interior of the engine. Reinstall the spark plug.
3. Blow dust / debris out of the air cleaner element using compressed air if available.
4. Store the machine in a clean, dry, dust-free area.
5. Always ensure the chainsaw has the appropriate cover on the bar and chain assembly.