![background image](http://html1.mh-extra.com/html/greencut/ggt200l/ggt200l_instruction-manual_2261464046.webp)
46
ASSEMBLY
SAFETY COVER AND AXLE PLATE
1. Turn the brushcutter upside down. Place the protective cover on top of the engine .
2. Secure the cover with 2 screws.
FLOWER PROTECTOR
1. Place the flower protector (8) on the motor housing.
FRONT HANDLE
1. Press the button (14) on both sides, and mount the front
handle on the control handle.
2. Turn the front handle to the required angle.
3. Release the button and make sure the handle engages in a
locking position.
INSTALLING THE BATTERY
NOTE:
The battery should be charged about 60 minutes before the first start.
1. Press the lock button and remove the battery from the device.
2. Insert the battery into the charger.
3. Plug the charger into the power supply.
4. The charge status is shown by the control lights. If all the lights are on, the charge is complete, if one led
is flashing you must recharge the battery and if all the leds are flashing it means that the battery is too hot
or too cold.
5. Insert the battery into the machine and make sure that it clicks into place correctly.