VENETO-40
-
Instructions for use
7
IV. INSTRUCTIONS FOR USE:
1. Set the device on a flat, stable surface. Put the plug in the wall socket.
2. Control panel: press any speed control button to turn the ventilating fan on: „1” - gentle airflow, „2” -
medium airflow or „3” – for strong airflow. To turn the fan off press “0” button.
3. Oscillatory knob: press the knob down to make the fan oscillate, to stop the fan release the knob.
4. Position setting: always turn the fan off before adjusting its position. Air flow can be directed upwards
or downwards by moving the grid down and up.
5. Height setting: loosen the height setting ring, then adjust the stand to the required height and tighten it.
V. CLEANING AND MAINTENANCE:
ATTENTION:
Turn the device off and unplug it before cleaning.
- do not immerse the appliance in water when cleaning it;
- do not clean with chemicals or corrosive lotions;
- use only soft, dry cloth to clean the appliance.
- in order to protect the fan during storage, it must be thoroughly cleaned, covered with a plastic bag and
kept in a dry place.
VI. TECHNICAL PARAMETERS
Input rated voltage: 220-240V~
Frequency: 50/60Hz
Power: 45W
II class protection - a product in which protection against electric shock is provided not only through basic
insulation, but also double or reinforced insulation.
Product meets the requirements of EU directives.
