www.GreenSeriesFitness.com
©April 2017
Call Toll free at (800) 269-7130
CIR-UB7000E-G1 Revision 1.2
9
John C. Jensen
UNPACKING & ASSEMBLY
Unpack your bike where you plan to use it. Being careful not to damage the plastic pieces and other components. Place
your bike on a level flat surface. It is recommended that you place a protective covering on your floor.
Step 1:
Assemble Front/Rear Base Tube with Main Frame
1). Remove the pre-lock screws on the front and back base tube.
2). Using a Allen wrench (6mm), install the (2) M8x20mm screws, lock washers, and flat washers securing the front
base tube to the main frame.
3). Using a Allen wrench (6mm), install the (2) M8x20mm screws, lock washers, and flat washers securing the back
base tube to main frame.
X1
X1
X 4
M
8
x
2
0
m
m
X 4
M
8
L
o
ck
W
a
sh
e
r
#5-1
#5-2
#5-3
#5-4
X 4
M
8
Fl
a
t
W
a
sh
e
r
#5-5
Allen wrench
(6mm)
