©April 2017
Call Toll free at 800-269-7130
CIR-TM7000-G1 Revision 1.1
12
John C. Jensen
UNPACKING & ASSEMBLY
Step 2:
Assemble the Console Mast
WARNING:
The tightening sequence
MUST
be adhered to when performing assembly.
1) Place the Console Wire into the RIGHT MAST and route it through the bottom using the GUIDE WIRE. (The LEFT
MAST is in the transparent bag.)
2)
Slide the right console mast down on to the console mast support tube. Using an Allen wrench (6mm), secure using
(6) M12x30mm bolts (#3-21) and (6) M12 S washers (#3-22) and (6) M8 washers (#3-23).
(Hand tighten the (6)
M12x30mm bolts. Final tightening will occur in Step 4.4 and 4.5).
#3-21
#3-23
#3-22
#3-23
#3-22
X6
X6
X6
#3-21
M1
2x
30
mm
M12
S
W
as
he
r
M1
2
W
as
h
er
Allen Wrench
10mm
