25
How to install two-wheel (CC3000/4000/5000) generator set
Installation schematic drawing as follow:
1—Handle 2—Nut M8 3—Spring Pin with Nylon Rope 4—Bolt M8×45
5—Bolt M8×16 6—Nut M8 7—Supporting Bracket 8—Nut M8
9—Supporting Leg 10—Cotter Pin 11—Locked Spacer 12—Pneumatic Tyre
13—Axle 14—Bracket
Note:
Pneumatic pressure in the tyre is 140~160 kPa.