Colours
The colours of the different signals of the Beacon can be adjusted by changing the
global colour scheme of the Green-GO config used. This can be done in the Config
settings menu of the Green-GO control software.
Default Colors
Idle
à
Blue
Active
à
Yellow
Call
à
Red
Allert Call
à
Red/White flash
Attention
à
Yellow/Red flash
Cue GO
à
Green
LED status
Slow green flash
à
Ok, other devices found with the same config
Green with slow red flash
à
No other devices found with the same config
Rapid red flash
à
Pairing mode, waiting for call to set group or user
Rapid green flash
à
Button pressed, waiting for config to clone
Rapid red with short off time
à
Boot mode
Rapid red with short green
à
Boot mode, button pressed –
countdown for reset running
Factory default settings
The IP of the Beacon will be set to dynamic if it is reset to factory defaults.
With no DHCP server in the network, it will get a link-local IP address in the
169.254.xxx.xxx range with a subnet of 255.255.0.0.
Summary of Contents for GGO-BEACON
Page 1: ...Beacon Quick Start Guide...
