B. Installation with HDMI-RJ45 Receiver
Installation with Receiver is recommended for simple point to point HDMI short
distance extension up to meters at 080p resolution
Requirement for each display-
x HDMI-RJ4 (HDMI-HR)
x Cat-X cable (max. m@080p)
• STEP : Complete local source installation procedure, please refer to page .
• STEP : Connect 4x8/4x6 HDMI Cat-X Expander “RJ-4 HDMI OUT” to HDMI-
RJ4 using Cat-X cable.
• STEP 3: Connect HDMI-RJ4 to HDMI display “HDMI INPUT” directly.
• STEP 4: Power on all devices
NOTE: For optimum result, please use Cat-e or Cat-6 FTP cable with minimal
delay skew property.
