A. Installation with Mini HDMI Receiver
Installation with Mini HDMI Cat-X Receiver is recommended for simple point to
point HDMI long distance extension up to 30 meters at 080p resolution
Requirement for each display-
x Mini HDMI Re power adaptor (V)
x Cat-X cable (max. 30m@080p)
x HDMI cable (or HDMI cable attached with HDMI display)
• STEP : Complete local source installation procedure, please refer to page .
• STEP : Connect 4x8/4x6 HDMI Cat-X Expander “RJ-4 HDMI OUT” to Mini •
HDMI Cat-X Extender Receiver “Cat-X IN” using Cat-X cable.
• STEP 3: Connect Mini HDMI Cat-X Extender Receiver “HDMI OUT” to
HDMI display using HDMI cable.
• STEP 4: Connect power adaptor to Mini HDMI Cat-X Extender Receiver
• STEP : Power on all devices
• STEP 6: Adjust equalizer control knob on Mini HDMI Cat-X Extender
Receiver to fine tune picture quality.
NOTE: To set automatic adjustment mode, please turn equalizer control
knob to left, “LINK IN” orange and green LED will lit constantly. If some
dynamic dots or unclear image is present on monitors, equalizer knob
can be adjusted manually by turn the knob slowly to the right, and
“LINK IN” orange LED will turn off.
NOTE: For optimum result, please use Cat-e or Cat-6 FTP cable with minimal
delay skew property.
