Wireless Remote Controller YT1F
18
3) SLEEP
Sleep On and Sleep Off can be selected by pressing this button. After powered on, the default
is Sleep Off. After the unit is turned off, the Sleep function is canceled. When the sleep function
is set already, the symbol will be displayed. And at this time, the time of timer can be adjusted.
Under Fan and Auto modes, this unction is not available.
4) FAN
Auto, Low, Medium, or High fan speed can circularly selected by pressing this button. After
powered on, the default is Auto speed. Under Dehumidifying mode, only Low fan speed is available.
Auto
Low speed
Medium speed
High speed
5) CLOCK
The clock can be set up by pressing this button, with the symbol displayed and blinking. In
such a case, pressing
＋
or
－
within 5 seconds can adjust the value. If the button is pressed down
for more than 2 seconds, the value on ten’s place will increase by 1 in every 0.5 seconds. After
that, repressing this button and then symbol stops blinking, which indicates the setting is made
successfully. After powered on, the default value is 12:00 with displayed. Once the symbol is
displayed, the current time is the Clock value; otherwise it is the Timer value.
6) LIGHT
Light On and Light Off can be set by pressing this button when the unit is at On or Off status.
After powered on, the default is Light On.
7) TURBO
In Cool or Heat mode, pressing this button can activate or deactivate this function. When this
function is on, its symbol will be displayed. Any change of either mode or fan speed will make this
function canceled automatically.
8) X-FAN
Pressing X -FAN button in COOL or DRY mode, the icon is displayed and the indoor fan will
continue operation for 10 min utes in order to dry the indoor unit even though you have turned off
the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT
mode.
9)
－
The preset temperature can be decreased by pressing this button. If the button is pressed
down for more than 2 seconds, the temperature will be decreased quickly until it is released, with
℃
(
℉
) displayed al the time. Under Auto mode, the temperature adjustment is unavailable.
10)
＋
The preset temperature can be increased by pressing this button. If the button is pressed down
for more than 2 seconds, the temperature will be increased quickly until it is released, with
℃
(
℉
)
displayed all the time. Under Auto mode, the temperature adjustment is unavailable. The setting
range is 16-30
℃
or 61-86
℉
11) TEMP
It can be decided by pressing this button which temperature will be displayed, indoor set
