Gree XE70-13/E, Owner'S Manual

Page: 21 / 40

Wired Controller XE70-13/E
15
Function Introduction
Save function
By setting the lower limit of set temperature for cool and dry
modes and the upper limit of set temperature for heat mode, the
air conditioner will run in a smaller temperature range, so as to
save energy.
I-Demand
function
The unit will run in energy-saving mode.
Holiday function
In heating mode, this function is used to maintain indoor
temperature when the user is out. When the user is back, the
unit can quickly heat up the room.
Low temperature
dry
The unit runs in dry mode at low temperature. Drying capacity is
improved.
X-Fan function
When the unit is turned off, the indoor evaporator will be dried to
prevent mildew. This function can only be enabled in cool or dry
mode.
Filter cleaning
indication
When this function is enabled, the unit will record its operation
time. When the set time is reached, the user will be reminded to
clean the filter, so as to avoid problems such as poor cooling
and heating, abnormal protection and bacteria growth due to not
cleaning for a long time and filter being blocked.