Gree XE70-13/E, Owner'S Manual

Page: 11 / 40

Wired Controller XE70-13/E
5
temperature range is 0°C~50°C.
2.3 Installation of Wired Controller
For installation steps of wired controller please refer to the following sketch map,
brief instructions are as below:
（
1
）
Before installation, please cut off the power supply of indoor unit, live
working during installation is not allowed;
（
2
）
Pull out the STP inside the wall from the installing hole, thread the wire
through the connecting hole in the back of soleplate of wired controller;
（
3
）
Stick the soleplate of wired controller on the wall, use screw M4×25 to fix
the soleplate onto the installing hole of wall;
（
4
）
Connect the four-core terminal of the twisted pairs to the four-pin header
on the wired controller.
（
5
）
Buckle the panel of wired controller with the soleplate, and then the
installation is finished.