●
●
●
NOTE
●
Introduction for buttons on
remote controller
Press this button to turn on the unit. Press this
button again to turn off the unit.
Press this button to select your required operat-
ion mode.
MODE
AUTO COOL DRY
FAN
HEAT
TURBO
adjust fan blowing angle.
Under COOL or HEAT mode, press this button to
●
●
●
●
When selecting heating mode, the air condition-
er operates under heat mode. Press " " or " "
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
button to adjust fan blowing angle. (Cooling
only unit won't receive heating mode signal. If
setting heat mode with remote controller, press
ON/OFF button can’t start up the unit).
●
NOTE
When selecting auto mode, air conditioner will
operate automatically according to ex-factory
setting. Press "FAN" button can adjust fan
speed. Press " " / " " button can adjust fan
blowing angle.
After selecting cool mode, air conditioner will
operate under cool mode. Press " " or " "
button to adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " "
button to adjust fan blowing angle.
When selecting dry mode, the air conditioner
operates at low speed under dry mode. Under
dry mode, fan speed can’ t be adjusted. Press
" " / " " button to adjust fan blowing angle.
When selecting fan mode, the air conditioner
will only blow fan, no cooling and no heating. All
indicators are OFF. Press "FAN" button to
adjust fan speed. Press " " / " " button to
For preventing cold air, after starting up heating mode,
indoor unit will delay 1~5 minutes to blow air (actual
delay time is depend on indoor ambient temperature).
Set temperature range from remote controller:
16~30
℃
(61-86°F);
Under auto mode, temperature can be displayed;
Under auto mode, set temperature can be adjusted.
This mode indicator is not available for some models.
FAN
,
, to
, then back to Auto.
NOTE
●
●
●
●
This button is used for setting Fan Speed in the
sequence that goes from AUTO,
, ,
,
This is a general use remote controller. It could be
used for the air conditioner with multifunction. For the
functions which the model doesn't have, if press the
corresponding button on the remote controller, the unit
will keep the original running status.
After putting through the power, the air conditioner will
give out a sound. Power indicator " " is ON. After
that, you can operate the air conditioner by using
remote controller.
Under on status, pressing the button on the remote
controller, the signal icon " " on the display of
remote controller will blink once and the air conditioner
will give out a " di " sound, which means the signa has
been sent to the air conditioner.
As for the models with functions of WiFi or wired
controller, the indoor unit must has been controlled by
standard remote controller under auto mode first, and
then the function of adjustable temperature under auto
mode can be realized by APP or the wired controller.
This remote controller can adjust the temperature
under auto mode. When matching with the unit which
is without the function of adjustable temperature under
auto mode, the set temperature under auto mode may
be invalid, or the displayed set temperature on the unit
is not same as that on the remote controller under
auto mode.
7
Under AUTO speed, air conditioner will select proper
fan speed automatically according to factory default
setting.
It
'
s low fan speed under dry mode.
X-FAN function: Holding fan speed button for 2s in
cool or dry mode, the icon
"
"
is displayed and the
indoor fan will continue operation for a few minutes in
order to dry the indoor unit even though you have
turned off the unit. After energization, X-FAN OFF is
defaulted. X-FAN is not available in auto, fan or heat
mode.
This function indicates that moisture on evaporator of
indoor unit will be blowed after the unit is stopped to
avoid mould.
Having set X-FAN function on: After turning off the
unit by pressing ON/OFF button, indoor fan will
continue running for a few minutes at low speed. In
this period, hold fan speed button for 2s to stop
indoor fan directly.
Having set X-FAN function off: After turning off the
unit by pressing ON/OFF button, the complete unit
will be off directly.
ON/OFF
