Gree T1/R22, Service Manual

Page: 37 / 61

MINI CHILLER MAINTENANCE
36
·Loosen the two screws fixing the
motor. Pull backward and remove the
motor.
（ See Fig .10 ）
·Loosen the wire of motor, and pull it
through the hole.
(4) Remove the 4-way valve and
capillary tube
1 ） Remove the 4-way valve
·Loosen the screws fixing the coil of
4-way valve
。
·Remove the coil of 4-way valve 。
·Welding out the tubes connected to the
4-way valve.
·Remove the 4-way valve.
（
See Fig.11
）
Note ： When welding, the valve should
be covered by wet cloth in order
to avoid the high temp. hurt
。
2
）
Remove the capillary tube
·Welding out the tubes connected to the
capillary tube.
·Remove the capillary
（ See Fig.12 ）
Fig. 10
Fig. 11
Fig. 12