INSTALLATION
The following is a brief XK-19 and XK-41 Wired Tether Controller
installation overview. See Wired Controller Installation Manual for more
detailed instructions on installation, start-up, and setup.
CONNECTING INDOOR UNIT- Select a proper location on the wall for
mounting the Tether Controller. Install switch box, if required by code.
Locate the 26-ft communication cable that came with the Tether
Controller. Run communication cable (as desired) between indoor unit
and selected wall mounting location.. Locate the Tether Controller
connector in the control box area of the indoor unit. Carefully connect
communication cable to indoor unit.
WIRED CONTROLLER INSTALLTION – Pull communication cable through
switch box (if one is used) and Wired Tether Controller backplate. Securely
fasten backplate to the switch box or wall.
Carefully connect communication cable to rear of Wired Tether Controller panel.
Push extra cable into wall and secure controller panel to backplate mounted on
the wall.
NOTE
: DO NOT CUT AN SPICE COMMUNICATION CABLE.
Follow the start-up setup instructions supplied with the Wired Tether Controller.
(Indoor Unit Type is for
Reference Only)
36
© 2014 Gree Electric Appliance, Inc.
