background image

To Users

Thank you for selecting Gree’s product. Please read this instruction manual carefully before installing 

and using the product, so as to master and correctly use the product. In order to guide you to correctly 

install and use our product and achieve expected operating effect, we hereby instruct as below:

(1) 

This equipment should be installed, operated or maintained by the qualified servicemen who have had 

specific training. During operation, all safety issues covered in the labels, User’s Manual and other 
literature should be followed strictly. This equipment is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction concerning use of the appliance by a person 

responsibility for their safety. Children should be supervised to ensure that they do not play with the 

appliance.

(2) This product has gone through strict inspection and operational test before leaving the factory. In order 

to avoid damage due to improper disassembly and inspection, which may impact the normal operation 
of unit, please do not disassemble the unit by yourself. You can contact with the special maintenance 

center of our company if necessary.

(3) For personal injury or property loss and damage caused by improper operation such as improper 

installation and debugging, unnecessary maintenance, violation of related national laws and rules and 
industrial standard, and violation of this instruction manual, etc., we will bear no liability.

(4) 

When the product is faulted and cannot be operated, please contact with our maintenance center as 

soon as possible by providing the following information.

 

y

Contents of nameplate of product (model, cooling/heating capacity, product No., ex-factory date).

 

y

Malfunction status (specify the situations before and after the error occurs).

(5) All the illustrations and information in the instruction manual are only for reference. In order to make 

the product better, we will continuously conduct improvement and innovation. We have the right to 

make necessary revision to the product from time to time due to the reason of sales or production, and 

reserve the right to revise the contents without further notice.

(6) 

The final right to interpret for this instruction manual belongs to Gree Electric Appliances Inc. of Zhuhai.

Summary of Contents for LSQWRF130M/D-M

















































Reviews: