SYSTEM FUNCTIONS
MODE BUTTON
The unit can be set to five different operating modes: HEAT, COOL, DRY, FAN ONLY and AUTO.
NOTE:
AUTO MODE has fixed setpoints of 68° F heating and 77° F cooling, which
are not adjustable. The system will automatically select heating or cooling to maintain
room temperature within this band.
SLEEP MODE
The Liv offers a Sleep Mode function for your comfort. The unit will automatically
adjust room
temperature during your sleep time. This slight change in temperature will not affect your
comfort level due to the natural effects that sleeping has on the body, but it will save on
energy consumption and will lower electric bills.
ENERGY SAVINGS MODE
This feature will automatically select the optimal compressor and fan speeds to allow for
energy savings while operating in Cooling or Heating modes. The compressor and fan will
automatically slow down as the room temperature reaches the set point.
SELF-DIAGNOSIS
Liv has a built-in computer which uses real-time diagnostics which help prolong the unit’s life.
The automatic diagnosis feature continuously scans for errors or malfunctions and fault codes
are shown on the unit display to facilitate troubleshooting and repair.
POWER FAILURE MODE
Power interruptions are no problem for the Liv system. User selections and system parameters
are stored in non-volatile memory. These parameters are retained during a power failure. When
power is returned, the Liv system will automatically return to the last operating mode.
INTELLIGENT DEFROST
The Liv Intelligent Defrost function increases room comfort and saves energy by eliminating
unnecessary defrost cycles. In heating mode, the unit will monitor the outdoor coil for frost
build up. Once frost buildup has been detected, the system will switch into a defrost mode to
remove the frost.
FAN BUTTON
Press the FAN button to adjust the indoor fan speed:
Low ( ), Medium (
), High (
), Turbo and Auto.
NOTE:
Turbo function is not available in Dry and Auto Modes.
The Livo unit will select proper fan speed automatically
according to ambient temperature.
14
OPERATION OF WIRELESS REMOTE CONTROLLER
CLOCK SETTING
Press this button to set clock time.“
” icon on remote controller
will blink. Within 5 seconds, press
or
button to set clock time.
With each pressing of
or
buttons, clock time will increase
or decrease 1 minute. To quickly adjust time setting, press and
hold
or
button for 2 seconds. Release button when you
have reached the desired time setting. Press “CLOCK” button to
confirm the time, and “
” icon will stop blinking.
NOTE:
Clock time adopts 24-hour mode. A 12-hour time
format is not available.
• Turbo function is not available in Dry and Auto mode.
• The fan operates at low speed in Dry and Auto modes, and the
speed cannot be adjusted.
• When Auto is selected, the unit will select the proper fan speed
automatically, according to the ambient temperature.
Fan Display
Clock Setting Display
LIGHT BUTTON
Press this button to turn off display light on indoor unit.
Press again to turn it back on.
Light Display
TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:10 PM Page 17
7
v
v
v
v
v
