OPERATION OF WIRELESS REMOTE CONTROLLER
TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:10 PM Page 17
14
●
●
resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is
started up, press "TIMER ON" button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button," "
icon disappears and the word "OFF" on
remote controller blinks. Press "▲" or
▲
" " button to adjust TIMER OFF setting.
After each pressing "▲" or " " button,
▲
TIMER OFF setting will increase or decrease 1min. Hold "▲" or "
▲
" button, 2s
later, the time will change quickly until reaching your required time.
Press "TIMER OFF" word "OFF" will stop blinking. " " icon resumes displaying.
Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
"TIMER OFF" button to cancel it.
Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
Before setting TIMER ON or TIMER OFF, please adjust the clock time.
After starting up TIMER ON or TIMER OFF, set the constant circulating valid.
After that, air conditioner will be turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If you don’t need this function, please
use remote controller to cancel it.
Function introduction for combination buttons
Energy-saving function
Under cooling mode, press "TEMP" and " CLOCK" buttons simultaneously to
start up or turn off energy-saving function. When energy-saving function is started
up, "SE" will be shown on remote controller, and air conditioner will adjust the set
temperature automatically according to ex-factory setting to reach to the best
energy-saving effect. Press "TEMP" and "CLOCK" buttons simultaneously again to
exit energy-saving function.
Under energy-saving function, fan speed is defaulted at auto speed and it can’t
be adjusted.
Under energy-saving function, set temperature can’t be adjusted. Press "TURBO"
button and the remote controller won’t send signal.
Note:
●
●
●
Note:
●
TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, " "
icon disappears and the word "ON" on remote controller blinks. Press "▲" or
▲
" "button to adjust TIMER ON setting.
After each pressing "▲" or " " button,
▲
TIMER ON setting will increase or decrease 1min. Hold "▲" or " " button, 2s
▲
later, the time will change quickly until reaching your required time.
●
●
Sleep function and energy-saving function can’t operate at the same time. I
energy-saving function has been set under cooling mode, press sleep button will
cancel energy-saving function. If sleep function has been set under cooling
mode, start up the energy-saving function will cancel sleep function.
