5
PANEL CONTROL
CAUTIONS:
If the unit is turned off in cool /dry/ heat mode and restarted
immediately , then it will wait at least 3minutes before running again.
1. Buttons
Timer: press this button to set the timer
Swing: press this button to make the vertical louver swing automatically.
Press once again, the swing will stop.
Speed: press this button for 5 seconds to select high, middle or low fan
Speed.
Up/down: press up or down button to set temperature or adjust the time in
Timer mode. Press both buttons to vary from Celsius to Fahrenheit.
Mode: press this button to select cool, heat, dry or fan mode (heat mode
only in YPC-H models).
Econ: press this button to a set energy saving mode (only in heat and cool
mode). This set temperature is 27
℃
in cool mode and 23
℃
in heat
mode . The fan speed is low. These data can’t be changed. The LED
display will flash or
accordingly. Press again to cancel it when
or
is flashing.
Power: press this button to turn on/off the unit.
2. LED display
Timer indicator
Dry, cool, fan and heat mode indicator (no
in YPC-C models)
High, middle and low fan speed indicator
Water Full indicator
Water Injection indicator
IR receiver window
Indicate the time and temperature. Display EX (X=2,3,5) when
there is something wrong (refer to Self diagnosis function).
Display E4 when coil is defrosted.
Celsius degree and Fahrenheit degree indicator.
