background image

 

 

Gree 2000 Technical Service Manual 

 
 
 
 

Introduction 

 

 
This technical manual describes large amount of information regarding Gree 2000 type air conditioner, 
including pictures, technical parameters, explosive views, parts and components list and circuit diagrams etc. 
Engineers, service staff and dealers of Gree hold that this is the most convenient way to know more about 
the information of our product technology. 

 
 

Technical Service Department, Gree Electric Appliances, Inc. Of Zhuhai 

 

March, 2004 

 
 

Table of Contents

 

 

 

1 Summary 

and 

features ........................................................................................................................... 1 

Specifications and technical parameters............................................................................................... 3 

3 Part 

name ................................................................................................................................................ 4 

Outline and installation dimension.....................................................................................................5-6 

5 System 

schematic diagram ..................................................................................................................... 7 

6 Electrical 

circuit 

diagram ...................................................................................................................... 7 

Function manual and operation method of remote controller.......................................................8-21 

Explosive view and parts and components list ..............................................................................22-30 

8 Disassembly 

procedures ..................................................................................................................31-34 

10 Care 

and 

maintenance.....................................................................................................................35-36 

11 Installation guide..............................................................................................................................37-42 

12 Malfunction 

analysis........................................................................................................................43-45

 

 

Summary of Contents for KFR-32GW/NJ1F


















































Reviews: