Gree GWHN09AANK3A1A, User Manual

Page: 20 / 62

Up\Down swing fan control
Buzzer
The air conditioner will send out "Hua" alert when it is energized or receives a control command.
Press key
After powered on, unit runs with auto mode when you press this key. Unit will be off when you press this key again.
Displayer
Running figure and mode figure display
After powered on, the figure will be displayer,then only Power/running indicator turn on.
When using remote controller to open unit,it will turn on,at the same time to display current setting running modes
Run and cool lights are green under the cool and auto cool mode
Run and heat lights are green under the heat and auto heat mode.
Run light is green under fan and auto fan mode.
Run and dehumidify lights are green under the dehumidify mode.
If turn off light key,then turned off all display(it's available when unit is off)
After setting sleep function,displayer continus former display. it's to say sleep function don't influence the ON/OFF of light
Dual 8 display
The nixie tube will display the setting temp.(setting range is 16-30 ).Under aoto mode cool and fan display 25 .It displays
20 , cool controller only display 25 and motor lock mulfunction display H6 under heat mode.It display H1 under defrost mode.
Automatic Control of Fan Speed
The indoor fan will automatically select high, medium or low speed with the change of ambient temperature.
Timer funticon
Setting time-on,when it's reach the setting time,unit will run according to the setting mode.Setting time-off,unit will auto be
off according to the setting time
PG motor lock protection
When turn on the fan motor,ifmotor continuously run for a while and the running speed is very slow,in order to prevent motor
automatically self-protection,it will stop running and display lock;If currently turns unit on,that dual 8 will display lock error
code H6;If current is unit off,unit will not display the block error information.
Dry function
The dry off is defaulted on the wireless remote control.
This function can be set up by wireless remote control.
Under Cool mode, to set up Dry function, after unit turned off, indoor fan will run a few minutes, after the water of unit inside has been
dried off, the function will be automatically turned off.
TURBO function
In Cool and Heat modes (Auto, Dehumidifying, Fan modes without turbo function), press the Turbo function, the "Turbo" will be displayed
on wireless remote control, the fan speed will not be changed, at the same time, the indoor fan will run at high speed; When repressed
this button, Turbo function will be exited, the "Turbo" on displayer will disappear, indoor fan will run at presetting fan speed, the fan speed
will change accordingly.
Memory
Upon re-energization after de-energization, the system will run under the status as such prior to de-energization.
Accessional display
When air conditioner is running and light function is set up as ON, four pieces decoration rim will display.
Swing for timer setting/fully swing/swing stop, the user can set up swing by wireless remteo control or adjust the position of swing
stop.
Downloaded from AC-Manual.com Manuals