Gree GWHN09AANK3A1A, User Manual

Page: 19 / 62

6 66 66
Artful
Manual of functions of remote controller and operation method
Manual of functions of remote controller
Temperature parameter
The room setting temperature(Tpreset)
The room ambient temperature (Tamb)
Basic Functions
Once energized, the compressor should in no way be restarted unless after 3-minute time interval at least. For the first
energization, the compressor will be started without 3-minute lag. The compressor, once started,will not be stopped
within 6 minutes with the change of room temperature.
Cooling Mode
Cooling Conditions and Process
Protection
Antifreeze Protection
If it is detected that the system is under antifreeze protection, the compressor and outdoor fan will be stopped,
Antifreeze protection is released when temp. is too high
DRY Modes
The conditions and process of DRY
Under this mode the setting temperature range is16 ~30 .
Setting dry, compressor will run or stop according to actual ambient information,indoor fan will run with low fan speed.
Heating Mode(No this function for Cooling only unit)
Heating Condition and Process
Under this mode, the temperature can be set within a range from 16 to 30 .
Protection funtion
Defrosting
Fan mode
The indoor fan will run at preset speed.
Auto mode
Other control
Sleep
If set sleep for several minutes,unit will adjust the setting temp. according to intelligent judgement when unit is cool or heat mode.
Under this mode the setting temperature range is16 ~30 .
Under this mode, the system will automatically select its run mode (cool, dehumidify, or fan) with the change of ambient
temperature, the protection function is the same with that of cool, heat mode.
This function manual is for:
This unit adopt intelligent defrosting, it can defrost according to the frosting conditions and display H1.
If ambient temperature is higher than presetting temperature, compressor, outdoor fan will run, indoor fan will run at setting fan speed.
If ambient temperature is lower than presetting temperature, compressor, outdoor fan will stop to run, indoor fan will run at setting
fan speed.
If set up heating, when ambient temp., is lower than setting temperature, compressor, outdoor fan will run,
indoor fan will run at setting fan speed;
If ambient temperature is higher than setting temperature, compressor, outdoor fan will stop to run, indoor fan will run.
Anti-cool wind: When heating started up, in order to avoid cool air blow out, the compressor will be delayed 0-3mins to start up;
firstly it will run at low speed then will run at presetting fan speed or directly turn to run at setting fan speed.
Anti-high temperature: in heat mode, when detected the temperature is higher, outdoor unit will stop to run; If temp.
descend, outdoor fan will resume to run.
Blowing surplus heat: In heat mode, due to temperature reached, compressor, outdoor fan will stop running, indoor fan will accord to
actual circumstance will run at low fan speed for a while then stop running.
Downloaded from AC-Manual.com Manuals